Course Dates 2019
Despite all the issues that Brexit is raising that our government seems incapable of answering, one thing that is certain …….. Driver CPC is not going away!
While the need for professional, vocational LGV and PCV drivers’ to attend regular refresher training was initially introduced into Great Britain to comply with the European Training Directive, the need to undertake 35 hours of JAUPT approved periodic training every five years is now a domestic requirement to comply with UK law and whatever happens in March 2019 in regard to the European Union, Driver CPC will still be here.
Truck UK provide both ‘in-house’ Driver CPC courses that goods vehicle operators’ organise for their own drivers on a date and at venue chosen by them, as well as at least one ‘open-to’all’ courses on one Saturday each month between now and September 2019 that individual drivers’ or groups of drivers’ can book for themselves and attend at our training centre in Lincolnshire (Thurlby, near Bourne – PE10 0EL). You can download a pdf formatted electronic copy of the most up to date list of dates for courses to be held at Thurlby by clicking: Driver CPC Courses 2019
While it’s still enough to ‘tick the box’, there’s no need for anyone to attend the same course more than once, just to get five courses in before September 2019. We are providing five different courses between now and the second cut-off date for acquired rights drivers and if you want to keep the Traffic Commissioner happy you would be well advised to show that you and the operator you work for have not just ‘ticked the box’ by sitting through the same course over and over, but that as a professional, vocational driver and/or operator you have made sure that you took the decision to refresh your knowledge of a wide range of subjects by planning your course attendances.
Below is a list of the open course dates that still have places available on them in 2019.
October and November 2018 course dates are now fully booked and 8th December 2018 will soon be full as well.
- Saturday 19th January 2019 Module 1 Drivers Hours / Module 2 Vehicle Maintenance
- Saturday 16th February 2019 Module 5 Work related road risk (WRRR) / Module 3 Site Awareness
- Saturday 16th March 2019 Module 4 H&S for professionals / Module 6 Anger Management
- Saturday 27th April 2019 Essentials of manual handling and safe use of fire extinguishers
- Saturday 11th May 2019 Vocational Driver Basic Training
- Saturday 22nd June 2019 Module 1 Drivers Hours / Module 2 Vehicle Maintenance
- Saturday 13th July 2019 Module 5 Work related road risk (WRRR) / Module 3 Site Awareness
- Saturday 10th August 2019 Module 4 H&S for professionals / Module 6 Anger Management
- Saturday 31st August 2019 Essentials of manual handling and safe use of fire extinguishers
Truck UK Trainers Jeff Marsh and Barry Graver
All Truck UK courses are presented by qualified and experienced trainers that know the haulage sector and work within it,with an understanding of what the role of a vocational driver involves. This means they won’t be just clicking a powerpoint and reading a manual to get through the seven hours, but rather trying their best to interact and make the admittedly very long training day as interesting and worthwhile as possible.
Attendance on a Truck UK course training day begins with the driver identity check procedure, which must be completed before the course proper begins, to comply with the requirements of the awarding body – The Joint Approvals Unit for Periodic Training (JAUPT).
So, all those that have booked to attend need to be on-site between 07.30 and 08.00 and have their photo-card driving licence; and/or their valid digital tachograph driver card; and/or their valid driver qualification card (DQC) with them, so that their identity can be confirmed and they sign to confirm that they are who they say they are!
The course proper will begin by 08.00, with a morning break of 15 minutes, a lunch break of 30 minutes and an afternoon break of 15 minutes, with a finish time of approximately 1600. Refreshments will be available throughout the day and a buffet lunch will be served in the middle of the day.
Attendees will be provided with handouts that refer to the course content, as appropriate.
Within a maximum of five days of the course completion, all those that were in attendance throughout the seven hours of training and have attended in relation to gaining their driver qualification card (DQC) will be registered with the Driver and Vehicle Standards Agency (DVSA). As long as the registration is accepted by DVSA and comes up as ‘valid’ against the attendees driving licence, a certificate of attendance will be provided to each person that has been registered.
Open-to-all course fee - The total cost of attendance, provision of refreshments throughout the day, a buffet lunch, course handouts, DVSA registration and the VAT element of the charges above is £75.00 per driver.
Payment must be completed at least seven days before the day of the course and all those paying for the course will be provided with a VAT Invoice.
In-house-course-presentations - If an operator or a group of drivers’ would rather have a course or courses presented at a time and location of their choice, we provide ‘in-house’ courses when Truck UK provide just the approved course and approved trainer, with the organiser arranging a suitable venue, refreshments and lunch or making it clear to those to attend that they must supply their own lunch.
The person booking and organising the ‘in-house’ day can specify start and finish times, as long as seven hours of training take place, to ensure that the JAUPT requirements have been met. A venue of choice can be used, as long as it meets minimum health and safety standards, in relation to sufficient seating for all those in attendance; safe access and egress to the training room; drinking water and toilets available throughout the day.
The cost for provision of the course and trainer is £595.00 + VAT (£119.00), with an additional cost of £8.75 per attendee that requires DVSA registration against their driving licence. The maximum number of persons that can attend and be registered with DVSA is twenty.
Contact us on 01832 274762 for more information or to book a place or places on a course or courses.
Alternatively e-mail: email@example.com providing your name, address and a contact number., with an idea of your query. We will respond within twenty four hours.
As an approved training centre (Approved Training Centre Number AC00184) we provide a variety of approved Driver CPC Periodic Training to both goods vehicle and passenger transport drivers.
The cost of booking this course, to be presented at your own premises or another location of your choice, is £595.00 + VAT (£119.00), plus the DVSA registration fee of £8.75 (zero VAT) per attendee that needs a new driver qualification card (DQC). So, if more than ten drivers attend, this method is more cost effective than attending open courses.
In-house course breakdown of total cost per driver
11 drivers attending and having DVSA registration breaks down to a total (inc. VAT) of £73.65 per driver
12 drivers attending and having DVSA registration breaks down to a total (inc. VAT) of £68.25 per driver
13 drivers attending and having DVSA registration breaks down to a total (inc. VAT) of £63.67 per driver
14 drivers attending and having DVSA registration breaks down to a total (inc. VAT) of £59.75 per driver
15 drivers attending and having DVSA registration breaks down to a total (inc. VAT) of £56.35 per driver
16 drivers attending and having DVSA registration breaks down to a total (inc. VAT) of £53.38 per driver
17 drivers attending and having DVSA registration breaks down to a total (inc. VAT) of £50.75 per driver
18 drivers attending and having DVSA registration breaks down to a total (inc. VAT) of £48.42 per driver
19 drivers attending and having DVSA registration breaks down to a total (inc. VAT) of £46.33 per driver
20 drivers attending and having DVSA registration breaks down to a total (inc. VAT) of £44.45 per driver
Emergency First Aid at Work (EFAW) – One Day Driver CPC Approved
We can also provide an ’Emergency First Aid at Work’ One Day Course (CRS5793/184) – presented by a qualified and knowledgeable specialist first aider on behalf of Truck UK, to a maximum of 12 learners. The content of the course includes:
- Aims of First Aid
- Priorities of Treatment
- Cardio-Pulmonary Resuscitation
- Use of Defibrillators
- Breathing, choking and circulation
- Bleeding, shock, blood loss theory, internal bleeding and treatment of shock
- Wounds and bleeding
- Recording incidents and First Aid Actions
This course provides learners with life-skills that can make a huge difference to a persons confidence when incidents and accidents happen, both at home as well as at work. The cost to the person or organisation that books the course is £595.00 + VAT of £119.00 and an additional £8.75 per attendee that requires DVSA registration. Please remember that the maximum number that can attend this course are twelve.
TO DISCUSS YOUR PERSONAL OR COMPANY REQUIREMENTS